Please contact our office at 800-952-0910 for questions, or to inquire about a title you cannot find.
*Please note that to become a licensed contractor in New Mexico, a Business and Law test must be taken.* The following references are recommended for this exam:
-
Principles and Practices of Commercial Construction, 10th Ed
$146.99View ProductFor courses in commercial construction.
A practical, well-rounded approach to modern construction principles and practices
Principles and Practices of Commercial Construction teaches students how to apply design theory to the construction process, providing crucial working knowledge for contractors managing subcontractors. Progressing from basic to advanced material, the text appears on the approved reference list for numerous states requiring contractors to pass licensing exams. Its flexible organization gives instructors the option of teaching ea… -
Carpentry and Building Construction 16th edition
$109.99View ProductCarpentry and Building, according to the publisher will be back in stock the week of July 4th. Be sure you receive your book from this first shipment Pre-order now and be prepared for your upcoming test. All Pre-orders will receive FREE Expedited shipping when choosing ground shipping at check out. Act now due to limited quantities these will go fast.
This newly revised edition includes content from McGraw-Hill Construction, where the professionals stay informed on the latest industry developme…
-
Pipe and Excavation Contracting
$41.99View ProductThis popular manual has been updated and improved to bring it more current with modern earthmoving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials.
-
Gypsum Construction Handbook 7th Edition
$48.99Gypsum Construction Handbook has been the best reference for gypsum products and systems in the building industry. Throughout the years it has evolved and changed as the building industry itself has evolved and changed.
The fifth edition of the Gypsum Construction Handbook is a guide to good construction procedures for gypsum drywall, veneer plaster, cement board and conventional plaster construction. It contains the newest developments in products and systems including time-saving, lower-cost methods of installation to simplify and speed construction. View Product
2015 International Building Code
$160.99View ProductThe scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.
Placing Reinforcing Bars 10th ed
$104.99View ProductPlacing Reinforcing Bars presents the best accepted current practices in placing reinforcing bars. It is written for apprentices, journeymen ironworkers, and inspectors. Definitive resource for preparing provisions in project specifications. Eighteen heavily illustrated chapters cover: materials, handling bars at the jobsite, general principles for bar placing, splicing, and tying; placing bars in footings, walls, columns, floors, roofs, pavements and highway structures; and coated reinforcing bars.
Manual of Construction with Steel Deck
$41.99View ProductManual of Construction with Steel Deck reviews good practice in Steel Deck Construction and serves as a safety primer for Contractors, Erectors, Architects, Engineers and Inspectors who are responsible for safe and proper field installation of steel deck.
Handling and Erection of Steel Joist and Joist Girders
$56.99View ProductHandling and Erection of Steel Joists and Joist Girders contains a thorough coverage of handling and erection procedures, including definitions of the various products, and a description of the preparing, tagging and loading of the joists at the manufacturer’s plant.
ACI-318-14
$258.99View ProductThe “Building Code Requirements for Structural Concrete” (“Code”) provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, nonprestressed, prestressed, and composite construction. Among the subjects covered are: design and construction for strength, serviceability, and durability; load combinations, load factors, and strength reduction factors; structural …
29 CFR 1926 OSHA Construction Industry Regulations & Standards Millennium C1 Edition, January 2022
$69.99View ProductSubpart U – COVID-19 Emergency Temporary Standard included.
Make compliance with dense government safety regulations simple with MANCOMM’s 29 CFR 1926 OSHA Construction Industry Regulations. Updated through January 2022, the book provides you with a comprehensive set of the most up-to-date Construction regulations.
Erectors’ Manual, Erection of Precast Concrete
$50.99View ProductErectors’ Manual, Standards and Guidelines for the Erection of Precast Concrete Products, is intended to provide standards (shown in boldface) and corresponding guidelines (commentary) for the erection of plant-produced precast and prestressed concrete products, and to establish a level of quality that will be recognized and respected by the construction industry.
ACI 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion
$141.99View ProductACI 530/530.1-13, “Building Code Requirements and Specification for Masonry Structures and Companion Commentaries,” is a joint document between ACI, The Masonry Society (TMS), and the American Society of Civil Engineers (ASCE). Beginning with the 2016 edition of this document, TMS is solely responsible for the development of this document. The 2016 edition can be purchased through the ACI Store, as well as other historical editions.
Training Manual for Un-bonded Post-Tensioning
$111.99View ProductTraining and Certification of Field Personnel for Unbonded Post-Tensioning – Level 1 Field Fundamentals is used in conjunction with PTI’s Level 1 Field Fundamentals training program. Provides guidance for field personnel involved in inspection, installation, stressing and finishing of unbonded single strand tendons and barrier cables. Latest edition has been updated to include expanded inspection checklist, information re. slab-on-ground installation and a glossary of PT terms presented in both English and Spanish.
Design and Control of Concrete Mixtures 17th edition
$157.99View ProductThis Design and Control of Concrete Mixtures 17th edition, presents the properties of concrete as needed in concrete construction, including strength and durability. All concrete ingredients (cementing materials, water, aggregates, admixtures, and fibers) are reviewed for their optimal use in designing and proportioning concrete mixtures. Applicable ASTM, AASHTO, and ACI standards are referred to extensively. The use of concrete from design to batching, mixing, transporting, placing, consolidating, finishing, and curing is addressed. Concrete sustainability, al…
Redi-Tag Permanent Tabs – 375 Blank Tabs
$38.99View ProductRedi-Tag permanent tabs are self-sticking and you can print on your laser printer in minutes or write directly on them. Made of heavy duty, durable plastic that won’t tear of curl. Input and format text using Windows® versions of Microsoft® Word and WordPerfect®. Actual size of tab 1-1/8″ x 1-1/4″. 100 tabs per pack.
New Mexico General Building Contractor License (GB-98)
$249.99View ProductThis course includes access to the GB-98 and GB-2 exam reviews. Both tests are required (in addition to the Business and Law Exam) to be passed to obtain a General Building Contractor License.
The New Mexico General Building Contractor Exam Review includes:
- Highlighting Guides
- Practice Exams
- Math and Plans Analysis
- Study Tips
- Licensing Information
- Instructor Support
New Mexico GB 98 Tab Pack
$105.99View ProductPERMANENT TABS PACKAGE – This package includes permanent tabs for ALL references allowed to be used during the exam.
