North Carolina Fuel Gas Code 2024 Edition – Loose Leaf
North Carolina Fuel Gas Code 2024 Edition – Loose Leaf
Book Overview
The 2024 North Carolina State Building Code: Fuel Gas Code (NCFGC 2024) is a specialized code that governs the installation and maintenance of fuel gas systems and appliances in North Carolina. It is based on the 2024 International Fuel Gas Code (IFGC) with state-specific amendments to address local conditions and requirements.
Key Aspects:
- Scope and Application: Applies to the installation of fuel gas piping systems, fuel gas appliances, gaseous hydrogen systems, and related accessories. Detached one- and two-family dwellings and townhouses not more than three stories high with separate means of egress and their accessory structures shall comply with the International Residential Code.
- General Regulations: Includes provisions for appliance location and installation, appliance and systems access, protection of structural elements, and clearances to combustibles. Also covers combustion air provisions for gas-fired appliances.
- Gas Piping Installations: Covers allowable materials for gas piping systems and the sizing and installation of such systems. Also addresses pressure regulators, appliance connections, and overpressure protection devices.
- Chimneys and Vents: Regulates the design, construction, installation, maintenance, repair, and approval of chimneys, vents, venting systems, and their connections to gas-fired appliances. Properly designed chimneys, vents, and venting systems are necessary to conduct to the outdoors the flue gases produced by the combustion of fuels in appliances.
- Specific Appliances: Addresses specific appliances that the code intends to regulate. Each main section applies to a unique type of gas-fired appliance and specifies the product standards to which the appliance must be listed.
Highlights:
1. Based on the 2024 International Fuel Gas Code (IFGC)
The 2018 Fuel Gas Code integrates the 2024 IFGC, adapted to meet North Carolina’s specific regulatory and environmental needs.
2. Comprehensive Coverage of Fuel Gas Systems
The code addresses the full scope of fuel gas installations and systems, including:
- Methods for sizing and installing gas piping systems
- Requirements for venting and chimneys
- Provisions for safe appliance installation, combustion air, and clearance from structural elements
3. Scope & Administrative Provisions
The initial chapters outline:
- What types of structures and systems fall under fuel gas code jurisdiction
- Permit and inspection protocols
- Classification of professionals (e.g., licensed gas technicians) and enforcement methodologies
4. General Regulations for Safe Gas Use
Detailed sections cover:
- Installation of piping, fittings, and materials for gas distribution
- Pressure testing procedures
- System accessibility requirements
These ensure safe and reliable fuel gas delivery and distribution.
5. Referenced Standards for Clarity & Consistency
Chapter 8 provides a list of national and industry standards (such as ANSI, NFPA, ASTM) referenced within the code, helping practitioners stay consistent with proven safety practices.
Key Features & Benefits
The 2024 North Carolina Fuel Gas Code provides a thorough framework for the safe design, installation, inspection, and maintenance of fuel gas systems in both residential and commercial buildings. Adapted from the 2024 International Fuel Gas Code (IFGC) with state-specific amendments, it covers everything from gas piping design and sizing to the safe installation of gas appliances, combustion air requirements, venting systems, pressure testing, and shutoff valve access. The code ensures proper material use, leak prevention, and system labeling, with detailed guidance on the installation of equipment such as furnaces, boilers, water heaters, and decorative appliances. It also references national safety and performance standards (e.g., ANSI, NFPA), ensuring that gas systems meet recognized industry benchmarks. By regulating every stage of a fuel gas system’s lifecycle—from planning to operation—the code helps ensure occupant safety, system reliability, and code compliance throughout North Carolina.
The practical application of the 2024 North Carolina Fuel Gas Code is seen in the daily work of contractors, plumbers, HVAC technicians, and inspectors who are responsible for installing and maintaining safe fuel gas systems. This code provides clear requirements for properly sizing gas piping, selecting approved materials, installing shutoff valves, and venting appliances to prevent gas leaks and carbon monoxide buildup. For example, when a gas-fired water heater is installed, the code ensures that adequate combustion air is provided, the venting system is correctly configured, and pressure testing is performed before the system is activated. Inspectors use the code to verify compliance during site visits, ensuring that systems meet pressure, clearance, and material standards. Ultimately, the code reduces the risk of fire, explosion, and exposure to toxic gases by requiring that every fuel gas installation in North Carolina follows a consistent, safety-focused standard.
The 2024 North Carolina Fuel Gas Code is a key study reference for professionals preparing for state licensing exams in plumbing, HVAC, and mechanical trades. The exam often tests knowledge of gas piping sizing, material selection, appliance installation, combustion air requirements, venting methods, and system pressure testing—all of which are detailed in the code. By studying this manual, candidates learn to apply safety standards, interpret code tables, and follow state-specific amendments that differ from national guidelines. Familiarity with code structure and technical terminology also helps test-takers navigate scenario-based questions more efficiently. Mastery of the fuel gas code not only increases the chances of passing the exam but ensures that licensed professionals are equipped to install and inspect gas systems that meet state safety standards.
The 2024 North Carolina State Building Code: Fuel Gas Code includes several visual and organizational tools designed to help professionals quickly locate, interpret, and apply technical requirements for safe fuel gas system installation and inspection.
- Structured Code Numbering
- Tables for Quick Reference
- Illustrations & Diagrams
- Referenced Standards Index
- Separation of Residential & Commercial Requirements
- Appendices & Amendments
- Index & Chapter Summary Pages
Book Details
- Publisher: International Code Council
- Edition/Release Date: January 1, 2024
- ISBN: 9781963845754
- Pages: 204
- Dimensions : 8.25 x 1 x 10.75 inches
- Format: Paperback / Looseleaf
- Target Audience: Professionals
Pricing & Purchase Information
• Price: $128.99
• Shipping: Free shipping on orders over $250.
• Formats Available: Physical Book
Related Products
-
North Carolina Fuel and Gas Code Permanent Tab
$14.99Add to cartPERMANENT TABS PACKAGE – This package includes permanent tabs for all references allowed to be used during the exam.
-
North Carolina Heating Group 3, Class 1, Contractor License – Books Only Package
$1,473.87Add to cartNorth Carolina Heating Group 3, Class 1, Contractor License requires pre-approval prior to sitting for the state exam. As of this time we do not offer any courses for this exam. We do offer all the required books for this exam here in one complete package. Individual books can be found in our bookstore. Please be sure to check back in the future for possible course material, as we are always adding to our course catalog.
IMPORTANT UPDATE
Per NC.gov:
“Update: November 11, 2025 – As of this date, the conditions of Section 5.12 (b) (see page 2) have not been met. This means that the effective date of the 2024 Building Code will be more than 12 months away. The earliest possible date is January 1, 2027, but that date has not been confirmed.”
-
North Carolina Heating Group 2 License – Books Only Package
$1,116.89Add to cartNorth Carolina Heating Group 2, Contractor License requires pre-approval prior to sitting for the state exam. As of this time we do not offer any courses for this exam. We do offer all the required books for this exam here in one complete package. Individual books can be found in our bookstore. Please be sure to check back in the future for possible course material, as we are always adding to our course catalog.
IMPORTANT UPDATE
Per NC.gov:
“Update: November 11, 2025 – As of this date, the conditions of Section 5.12 (b) (see page 2) have not been met. This means that the effective date of the 2024 Building Code will be more than 12 months away. The earliest possible date is January 1, 2027, but that date has not been confirmed.”
-
North Carolina Heating Group1, Class 1, Contractor License – Books Only Package
$1,327.87Add to cartNorth Carolina Heating Group 1, Class 1, Contractor License requires pre-approval prior to sitting for the state exam. As of this time we do not offer any courses for this exam. We do offer all the required books for this exam here in one complete package. Individual books can be found in our bookstore. Please be sure to check back in the future for possible course material, as we are always adding to our course catalog.
IMPORTANT UPDATE
Per NC.gov:
“Update: November 11, 2025 – As of this date, the conditions of Section 5.12 (b) (see page 2) have not been met. This means that the effective date of the 2024 Building Code will be more than 12 months away. The earliest possible date is January 1, 2027, but that date has not been confirmed.”
