Please contact our office at 800-952-0910 for questions, or to inquire about a title you cannot find.
The following references are recommended for the Georgia Conditioned Air Contractor examination.
Please note that Low Pressure Boilers” is used ONLY on the Class II (Unrestricted) exam.
Manual N and Manual Q are NOT allowed into the exams.
-
2017 National Electrical Code – NFPA 70
$162.99View ProductThroughout the United States and around the world, NFPA 70®: National Electrical Code® (NEC®) sets the foundation for electrical safety in residential, commercial, and industrial occupancies.
-
2015 International Energy Conservation Code
$68.99View ProductThe IECC addresses energy efficiency on several fronts including cost savings, reduced energy usage, conservation of natural resources and the impact of energy usage on the environment.
-
Manual D – Residential Duct Systems
$89.99View ProductDesign a residential duct system in less time with the streamlined Manual D duct procedure. The newly released Manual D has been significantly revised to include:
- Updated and expanded VAV guidance, with detailed examples.
- Impacts of excess length, sag and compression in flexible ducts.
- New equivalent length values for flex duct junction boxes.
-
29 CFR OSHA 1926 Construction Industry Regulations & Standards, January 2023 Edition
$69.99View ProductMake compliance with dense government safety regulations simple with the 29 CFR 1926 OSHA Construction Industry Regulations. Updated through January 2023, the book provides you with a comprehensive set of the most up-to-date Construction regulations.
-
Manual J Residential Load Calculation (8th Ed.)
$151.99View ProductMJ8 produces equipment sizing loads for single-family-detached homes, small multi-unit structures, condominiums, town houses and manufactured homes. This new version incorporates complete MJ8-AE volume in a user friendly format.
-
ACCA Ductulator – Duct Calculation Slide Rule
$54.99View ProductOne of our most popular catalog items! This durable two-sided plastic sizing wheel comes with a complete instruction manual for residential and commercial duct-sizing procedures. Designed by Hank Rutkowski.
-
2018 International Mechanical Code
$106.99View ProductEstablishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC® was developed with broad-based principles that make possible the use of new materials, methods and design.
-
2018 International Fuel Gas Code
$106.99View ProductAddresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.
-
REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition.
$179.99View ProductDevelop the knowledge and skills you need to maintain and troubleshoot today’s complex heating, air conditioning, and refrigeration systems with REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition. This practical, easy-to-understand book provides hands-on guidance, practical applications, and the solid foundation you need to fully understand today’s HVAC
-
Trane Ductulator
$18.99View ProductThe Trane Ductulator is a handheld rotating calculator used for sizing supply and return duct systems using the equal friction design method.
See the full description below.
-
Redi-Tag Permanent Tabs – 375 Blank Tabs
$38.99View ProductRedi-Tag permanent tabs are self-sticking and you can print on your laser printer in minutes or write directly on them. Made of heavy duty, durable plastic that won’t tear of curl. Input and format text using Windows® versions of Microsoft® Word and WordPerfect®. Actual size of tab 1-1/8″ x 1-1/4″. 100 tabs per pack.
-
Carrier System Design Manuals 1-3 (Set)
$94.99View ProductCarrier System Design Manuals these books are also available to be purchased individually.
-
Georgia Conditioned Air Contractor (Class I and II)
$219.99View ProductThis online course provides everything you need to pass the Georgia Conditioned Air Contractor Exam, including:
- Highlighting Guides
- Practice Exams
- Math and Calculations
- Study Tips
- Licensing Information
- Instructor Support
Georgia Conditioned Air Contractor (Class I and II) Examination Materials:
- 2018 International Fuel Gas Code
- 2018 International Mechanical Code
- 2017 National Electrical Code – NFPA 70
- Manual D – Residential Duct Systems
- Manual J Residential Load Calculation (8th Ed.)
- REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition.
- Georgia, NASCLA Contractors Guide to Business and Project Management Industry Licensing Board 5th ed
- 29 CFR OSHA 1926 Construction Industry Regulations & Standards, January 2023 Edition
- Carrier System Design Manuals 1-3 (Set)
- Flexible Duct Performance and Installation
- Trane Ductulator
- ACCA Ductulator – Duct Calculation Slide Rule
- 2015 International Energy Conservation Code
- Low Pressure Boilers, 5th Edition
Georgia Conditioned Air Contractor (Class I and II) Examination Material Tabs:
- Georgia Conditioned Air Contractor Tab Pack
- 2018 International Fuel Gas Code Tabs
- 2018 International Mechanical Codes – Tabs
- Manual D Tabs
- Manual J Residential Load Calculation Pre-Printed tabs
- Refrigeration and Air Conditioning Technology, 8th Tabs
- Georgia Business and Project Permanent Tabs
- OSHA Part 1926 Tabs
- Carrier System Design Manual, Part 1, Part 2, Part 3 tab pack.
-
Low Pressure Boilers, 5th Edition
$125.99View ProductLow Pressure Boilers is the leading resource for preparing for low pressure boiler operator and facility operating engineer licensing.
-
Georgia, NASCLA Contractors Guide to Business and Project Management Industry Licensing Board 5th ed
$81.99View ProductGeorgia NASCLA Contactors Guide to Business, Law and Project Management, Georgia Construction Industry Licensing Board, 5th edition. (Plumbing, Conditioned Air, Low Voltage, Electrical and Utility Contractors)
-
Carrier System Design Manual, Part 1, Part 2, Part 3 tab pack.
$32.99View ProductPre-printed tabs for the Carrier System Design Manual Package.
-
Georgia Conditioned Air Contractor Tab Pack
$95.99View ProductPERMANENT TABS PACKAGE – This package includes permanent tabs for some of the references allowed to be used during the exam
-
Gently Used – Flexible Duct Performance and Installation
$21.99View ProductFlexible Duct Performance & Installation Standards is used and referenced by designers, installers, contractors and users for evaluating, selecting, specifying and installing flexible duct for heating and air conditioning systems.
-
Georgia Business Law Complete Package – Industry Licensing
$210.97View ProductTo acquire your Plumbing, Conditioned Air, Low Voltage, Electrical and Utility License you need to pass the GA Business and Law Industry Exam.
Georgia State law requires contractors to be licensed and regulated by the Professional Licensing Board. Eligibility for examination is determined by the Board. We offer review for the Georgia Business and Law exam through online practice tests. Our practice tests include over 245 questions and are designed to be the best and most efficient way to prepare you for your business and law examination. @HomePrep is a National Leader in online education. With over 100,000 satisfied students and a course catalog of over 1,000 classes, we are here to help you – Invest in Yourself.
The Georgia Business Law Complete Package – Residential and General Construction includes the following:
- Georgia Business and Law Practice Test
- Georgia Business and Project Permanent Tabs
- Georgia-Nascla Contractors Guide to Business, Law and Project Management, Industry Licensing
-
Georgia Conditioned Air Contractor (Class II) Complete Package
View ProductThe Georgia Conditioned Air Contractor (Class I) Complete Package includes the following:
- Georgia Conditioned Air-Conditioned Air Exam Review
- 2018 International Gas Code
- 2018 International Mechanical Code
- 2017 National Electrical Code
- 2015 International Energy Conservation Code
- Manual D
- Manual J
- Refrigeration and Air Conditioning Technology
- Contractors Guide to Business, Law, and Project Management – Georgia
- Osha
- Carrier Systems Design Manuals (1-3)
- Flexible Duct Performance and Installation Standards
- Trane Ductulator
- Acca Flexible Duct Slide Rule or Calculator
- Low Pressure Boilers
- Georgia Conditioned Air Contractor Tab Pack
The following Amendments are downloadable at the following links:
The following books are not allowed in the Exam:
-
- Manual N
- Manual Q
-
Georgia Conditioned Air Contractor (Class I) Complete Package
View Product- The Georgia Conditioned Air Contractor (Class I) Complete Package includes the following:
- Georgia Conditioned Air-Conditioned Air Exam Review
- 2018 International Gas Code
- 2018 International Mechanical Code
- 2017 National Electrical Code
- 2015 International Energy Conservation Code
- Manual D
- Manual J
- Refrigeration and Air Conditioning Technology
- Contractors Guide to Business, Law, and Project Management – Georgia
- Osha
- Carrier Systems Design Manuals (1-3)
- Flexible Duct Performance and Installation Standards
- Trane Ductulator
- Acca Flexible Duct Slide Rule or Calculator
- Georgia Conditioned Air Contractor Tab Pack
The following Amendments are downloadable at the following links:
The following books are not allowed in the Exam:
- Manual N
- Manual Q
- The Georgia Conditioned Air Contractor (Class I) Complete Package includes the following:
-
Gently Used – REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition
$129.99View ProductDevelop the knowledge and skills you need to maintain and troubleshoot today’s complex heating, air conditioning, and refrigeration systems with REFRIGERATION AND AIR CONDITIONING TECHNOLOGY, 8th Edition. This practical, easy-to-understand book provides hands-on guidance, practical applications, and the solid foundation you need to fully understand today’s HVAC
